HP 7000 dl Router Series Guida Utente Scaricare il pdf (Pagina 613)

100

101

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

frame-relay bc <committed burst value>

Use the frame-relay bc command to set the b

(committed burst) value for a Frame Relay sublink. The

value is in bits. Use the no form of this command to return to default.

Syntax Description

<committed burst value> Enter the committed burst value (in bits) for the sublink.

Default Values

The default is 0 (no limit).

Command Modes

(config-fr 1.1)# Virtual Frame Relay Sub-Interface Configuration Mode required

Functional Notes

The time interval is always one second, so this can also be considered bits per second. Shaping is

performed on a sliding one-second window to make maximum use of configured bandwidth. Note that

when both b

and b

are non-zero, shaping is performed on the virtual circuit. The circuit is limited to the

sum of b

and b

, and it is recommended that the sum always be greater than 8000.

Usage Examples

The following example configures sublink fr 1.1 with a committed burst value of 128000 bits:

(config)#interface fr 1.1

(config-fr 1.1)#frame-relay bc 128000

1 2 ... 608 609 610 611 612 613 614 615 616 617 618 ... 940 941

Commenti su questo manuale

Nessun commento

HP 7000 dl Router Series Guida Utente Pagina 613

Commenti su questo manuale

Prodotti e manuali riguardandi Networking HP 7000 dl Router Series