HP 7000 dl Router Series Guida Utente Scaricare il pdf (Pagina 179)

100

101

SROS Command Line Interface Reference Guide Enable Mode Command Set

show qos map

The show qos map command outputs information about the QoS map. This information differs based on

how a particular map entry is defined.

Variations of this command include the following:

show qos map

show qos map interface <interface ID>

show qos map <map name>

show qos map <map name> <sequence number>

Syntax Description

<map name> Enter the name of a defined QoS map.

<sequence number> Enter one of the map’s defined sequence numbers.

<interface> Specify an interface to display QoS map information for just that interface (e.g.,

frame-relay, ppp, or atm). Enter the show qos map interface ? command for a

complete list of interfaces.

Default Values

No defaults necessary for this command.

Command Modes

# Enable Mode

Usage Example

#show qos map

qos map priority

map entry 10

match IP packets with a precedence value of 6

priority bandwidth: 400 (kilobits/sec) burst: default

packets matched by map: 125520

map entry 20

match ACL icmp

packets matched by map: 99

map entry 30

match RTP packets on even destination ports between 16000 and 17000

packets matched by map: 0

map entry 50

match ACL tcp

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 940 941

Commenti su questo manuale

Nessun commento

HP 7000 dl Router Series Guida Utente Pagina 179

Commenti su questo manuale

Prodotti e manuali riguardandi Networking HP 7000 dl Router Series