HP 7000 dl Router Series Guida Utente Scaricare il pdf (Pagina 562)

100

101

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set

bonding txnull-timer <seconds>

Use the bonding txnull-timer command to specify the value (in seconds) for the answering endpoint

negotiation timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds> Specifies the number of seconds the endpoint waits to detect the BONDING

negotiation frame pattern from the originating endpoint (after answering a call)

before considering the BONDING negotiation a failure

Default Values

<seconds> 10 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Functional Notes

Specifies the length of time the answering endpoint attempts to detect the BONDING negotiation pattern

from the originating endpoint before deciding the BONDING call has failed. It may be necessary to shorten

this timer if the DTE equipment using the BONDING module also has timer constraints for completing

non-BONDING parameter negotiation.

Usage Examples

The following example defines a txnull-timer value of 8 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txnull-timer 8

1 2 ... 557 558 559 560 561 562 563 564 565 566 567 ... 940 941

Commenti su questo manuale

Nessun commento

HP 7000 dl Router Series Guida Utente Pagina 562

Commenti su questo manuale

Prodotti e manuali riguardandi Networking HP 7000 dl Router Series