HP Printer PCLA8205B Manuale Utente

EtherExpressTM Pro/10+ ISAPCLA8205BInstallation Guide

1 Connecting to a Netware 3.12 ServerWindows 95 SR2

2 Connecting to a Netware 4.11 ServerWindows for Workgroups Version 3.112 Connecting to a Netware 4.11 ServerWindows for Workgroups Version 3.11Requir

2 Connecting to a Netware 4.11 ServerWindows for Workgroups Version 3.11listed above under the heading “Device Configuration.”6 If changes are require

2 Connecting to a Netware 4.11 ServerWindows for Workgroups Version 3.11❒ C:\NOVELL\CLIENT32❒ C:\WINDOWS❒ 16-bit LAN drivers❒ Intel EtherExpress ™ PRO

2 Connecting to a Netware 4.11 ServerWindows for Workgroups Version 3.11

2 Connecting to a Netware 4.11 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• Intel EtherExpress Pro 10+

2 Connecting to a Netware 4.11 ServerWindows 95 SR28 Power on the machine and allow it to boot to Windows 95 SR2. If you are using a Vectra VE7/VE8,

2 Connecting to a Netware 4.11 ServerWindows 95 SR213 Click “OK” to the “Network” dialog box to provide computer / work group names.14 Specify your C

2 Connecting to a Netware 4.11 ServerWindows 95 SR2

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Version 3.113 Connecting to a Windows NT Server 3.51Windows for Workgroups Version 3.11

NoticeThe information contained in this document is subject to change without notice.Hewlett-Packard makes no warranty of any kind with regard to this

Windows for Workgroups Version 3.117 Remove the Intel drivers diskette and reboot the machine.8 After Windows loads, open the “NETWORK” program group,

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Version 3.1120 When prompted for the file “EPRO.DOS”, insert the Intel EtherExpress dri

Windows for Workgroups Version 3.11

3 Connecting to a Windows NT Server 3.51Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2• Intel EtherExpress PRO 10+ ISA Ethe

3 Connecting to a Windows NT Server 3.51Windows 95 SR2If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure. If

3 Connecting to a Windows NT Server 3.51Windows 95 SR2names.14 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have

3 Connecting to a Windows NT Server 3.51Windows 95 SR2

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.51Windows NT Workstation Version 3.51Requirements• HP Vectra with Microsoft

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.51on “Control Panel.”9 Select the “Network” icon, and click “YES” to install

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.51Setup” dialog box.

1 Connecting to a Netware 3.12 ServerWindows for Workgroups Version 3.111 Connecting to a Netware 3.12 ServerWindows for Workgroups Version 3.11Requir

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 4.0Windows NT Workstation Version 4.0Requirements• HP Vectra with Windows NT W

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 4.07 Remove the Intel drivers diskette and reboot the machine.8 Power on the m

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 4.025 When “Windows NT is now ready to start the network…” click on “Next.”26

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 4.0

4 Connecting to a Windows NT Server 4.0Windows for Workgroups Version. 3.114 Connecting to a Windows NT Server 4.0Windows for Workgroups Version. 3.11

4 Connecting to a Windows NT Server 4.0Windows for Workgroups Version. 3.117 Remove the Intel drivers diskette and reboot the machine.8 After Windows

4 Connecting to a Windows NT Server 4.0Windows for Workgroups Version. 3.1120 When prompted for the file “EPRO.DOS”, insert the Intel EtherExpress dri

4 Connecting to a Windows NT Server 4.0Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2.• Intel EtherExpress PRO 10+ ISA Ethe

4 Connecting to a Windows NT Server 4.0Windows 95 SR2If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. I

4 Connecting to a Windows NT Server 4.0Windows 95 SR214 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the re

1 Connecting to a Netware 3.12 ServerWindows for Workgroups Version 3.11listed above under the heading “Device Configuration.”6 If changes are require

4 Connecting to a Windows NT Server 4.0Windows 95 SR2

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.51Windows NT Workstation Version 3.51Requirements• HP Vectra with Microsoft W

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.51on “Control Panel.”9 Select the “Network” icon, and click “YES” to install

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.5123 To complete the installation, remove the floppy disk, and click on “Res

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.0Windows NT Workstation 4.0Requirements• HP Vectra with Windows NT Workstation 4.0 Se

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.07 Remove the Intel drivers diskette and reboot the machine.8 Power on the machine an

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.024 At the “Show Bindings for:” prompt, accept default settings and click on “Next.”2

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.0

Version Number Intel Pro10+ Rev.1

1 Connecting to a Netware 3.12 ServerWindows for Workgroups Version 3.11❒ C:\NOVELL\CLIENT32❒ C:\WINDOWS❒ 16-bit LAN drivers❒ Intel EtherExpress ™ PRO

1 Connecting to a Netware 3.12 ServerWindows for Workgroups Version 3.11

1 Connecting to a Netware 3.12 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• Intel EtherExpress Pro 10+

1 Connecting to a Netware 3.12 ServerWindows 95 SR28 Power on the machine and allow it to boot to Windows 95 SR2.If you are using a Vectra VL8 or VL7

1 Connecting to a Netware 3.12 ServerWindows 95 SR215 Click on “Close” button, and files will copy.16 When prompted for the file “NETAPI.DLL”, set t