HP 7000 dl Router Series Guida Utente Scaricare il pdf (Pagina 524)

SROS Command Line Interface Reference Guide DSX-1 Interface Configuration Command Set

loopback network [line | payload]

Use the loopback network command to initiate a loopback on the interface toward the network. Use the

no form of this command to deactivate the loopback.

Syntax Description

line Initiates a metallic loopback of the physical T1 network interface

payload Initiates a loopback of the T1 framer (CSU portion) of the T1 network interface

Default Values

No default necessary for this command.

Command Modes

(config-t1 1/1)# T1 or DSX-1 Interface Configuration Mode required.

(config-t1 1/2)#

Functional Notes

The following diagram depicts the difference between a line and payload loopback.

Usage Examples

The following example initiates a payload loopback of the DSX-1 interface:

(config)#interface t1 1/2

(config-t1 1/2)#loopback network payload

T1 Network Interface

Payload Loopback

Line Loopback

Nessun commento

HP 7000 dl Router Series Guida Utente Pagina 524