HP 7000 dl Router Series Guida Utente Scaricare il pdf (Pagina 518)

100

101

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set

tdm-group <group number> timeslots <1-24> speed [56 | 64]

Use the tdm-group command to create a group of contiguous DS0s on this interface to be used during the

bind process. See crypto map <mapname> on page 731 for related information.

Syntax Description

<group number> Numerical label to identify the created tdm-group (valid range: 1-255).

timeslots Keyword to specify the DS0s to be used in this tdm-group.

<1-24> Specifies the DS0s to be used in the tdm-group. This can be entered as a single

number representing one of the 24 T1 channel timeslots or as a contiguous group

of DS0s. (For example, 1-10 specifies the first 10 channels of the T1.)

speed Optional.

Keyword to specify the individual DS0 rate on the T1 interface. If the speed

keyword is not used, the Secure Router OS assumes a DS0 rate of 64 kbps.

56 Specifies a DS0 rate of 56 kbps.

64 Specifies a DS0 rate of 64 kbps.

Default Values

By default, there are no configured tdm-groups.

Usage Examples

The following example creates a tdm-group (labeled 5) of 10 DS0s at 64 kbps each:

(config)#interface t1 1/1

(config-t1 1/1)#tdm-group 5 timeslots 1-10 speed 64

Caution

Changing tdm-group settings could potentially result in service interruption.

1 2 ... 513 514 515 516 517 518 519 520 521 522 523 ... 940 941

Commenti su questo manuale

Nessun commento

HP 7000 dl Router Series Guida Utente Pagina 518

Commenti su questo manuale

Prodotti e manuali riguardandi Networking HP 7000 dl Router Series