HP 7000 dl Router Series Guida Utente Scaricare il pdf (Pagina 483)

100

101

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

spanning-tree port-priority <priority level>

Use the spanning-tree port-priority command to select the priority level of this interface. To return to the

default setting, use the no version of this command.

Syntax Description

<priority level> Set to a value from 0-255.

Default Values

By default, this set to 128.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet, virtual PPP interfaces (ppp 1), virtual Frame

Relay sub-interfaces (fr 1.20), and atm sub-interfaces (1.2).

Functional Notes

The only time that this priority level is used is when two interfaces with a path to the root have equal cost.

At that point, the level set in this command will determine which port the spanning-tree will use. Set the

priority value lower to increase the chance the interface will be used.

Usage Examples

The following example sets the interface to a priority of 100:

(config)#interface eth 0/1

(config-eth 0/1)#spanning-tree port-priority 100

1 2 ... 478 479 480 481 482 483 484 485 486 487 488 ... 940 941

Commenti su questo manuale

Nessun commento

HP 7000 dl Router Series Guida Utente Pagina 483

Commenti su questo manuale

Prodotti e manuali riguardandi Networking HP 7000 dl Router Series