HP Modular Smart Array 500 Starter Kit Manuale Utente Scaricare il pdf (Pagina 37)

Troubleshooting

3-4 HP Smart Array Multipath Software User Guide

HP CONFIDENTIAL

Writer: Rob Weaver File Name: d-ch3 Troubleshooting.doc

Codename: BorealisII Part Number: 307958-003 Last Saved On: 9/19/03 9:22 AM

Cable Failure

To replace the failed cable:

1. Power down the HBA in one of the following ways:

— For a PCI-based HBA in a Microsoft operating system environment, use the

PCI Hot Plug functionality in the server to remove the HBA while the server

is online.

— For an embedded HBA in a Microsoft operating system environment, power

down the server.

— For an HBA in a Linux operating system environment, power down the

server.

2. Disconnect the SCSI cable:

a. Disconnect the cable from the MSA500 system.

b. Disconnect the cable from the connector on the HBA or from the external

VHDCI connector on the server.

3. Connect the replacement cable:

a. Connect the cable to the connector on the HBA or to the external VHDCI

connector on the server.

b. Connect the cable to the MSA500 system.

4. Apply power to the replacement HBA in one of the following ways:

— Use PCI Hot Plug functionality to restore power (PCI-based Microsoft Only).

— Power up the server.

1 2 ... 32 33 34 35 36 37 38 39

Nessun commento

HP Modular Smart Array 500 Starter Kit Manuale Utente Pagina 37