HP Modular Smart Array 500 Starter Kit Manuale Utente Scaricare il pdf (Pagina 19)

System Preparation

HP Smart Array Multipath Software User Guide 1-11

HP CONFIDENTIAL

Writer: Rob Weaver File Name: b-ch1 System Preparation.doc

Codename: BorealisII Part Number: 307958-003 Last Saved On: 9/19/03 9:20 AM

6. Be sure that the Multipath I/O support option is set as a module. If it is not set

as a module, use the space bar to cycle through the settings until an “M” appears

next to the option.

7. Press the Esc key twice to exit the menus.

8. When prompted to save the new kernel configuration, press the Enter key to

select Yes.

9. Make the kernel:

a. From the root level, enter:

make

b. Wait for the kernel to be made. Depending on the hardware configuration,

this process can last up to 30 minutes.

Making and Installing the Module

To make and install the module:

1. From the root level, enter:

make modules

2. Wait for the modules to be made.

3. After the module is made, install the module:

a. From the root directory, enter:

make modules_install

b. Load the module. Enter:

insmod multipath

4. Verify that the module is installed and loaded by listing all modules. Enter:

lsmod

The kernel is now ready for multipath operations.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 38 39

Nessun commento

HP Modular Smart Array 500 Starter Kit Manuale Utente Pagina 19