HP Modular Smart Array 500 Starter Kit Manuale Utente Scaricare il pdf (Pagina 30)

Installation and Operation

2-6 HP Smart Array Multipath Software User Guide

HP CONFIDENTIAL

Writer: Rob Weaver File Name: c-ch2 Installation and Operation.doc

Codename: BorealisII Part Number: 307958-003 Last Saved On: 9/19/03 9:20 AM

Working Devices : 2

Failed Devices : 0

Spare Devices : 0

Number Major Minor RaidDevice State

0 106 2 0 active sync /dev/cciss/c2d0p2

1 105 2 1 active sync /dev/cciss/c1d0p2

UUID : b1ec5895:5ed49b44:7ec7d4a8:397e19b1

IMPORTANT: You can also review status by running:

/proc/mdstat

Results would look similar to the following:

Personalities : [multipath]

read_ahead 1024 sectors

md0 : active multipath cciss/c2d0p2[0] cciss/c1d0p2[1]

14683328 blocks [2/2] [UU]

unused devices : <none>

4. To format the volume, run:

mkfs –t ext2 /dev/md0

5. To mount the volume, run:

mount /dev/md0/spare_filesystem

6. Configuration is complete. To perform multipath operations, refer to “Static Load

(Read-Only) Balancing” in this chapter.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

Nessun commento

HP Modular Smart Array 500 Starter Kit Manuale Utente Pagina 30