HP Modular Smart Array 500 Starter Kit Manuale Utente Scaricare il pdf (Pagina 27)

Installation and Operation

HP Smart Array Multipath Software User Guide 2-3

HP CONFIDENTIAL

Writer: Rob Weaver File Name: c-ch2 Installation and Operation.doc

Codename: BorealisII Part Number: 307958-003 Last Saved On: 9/19/03 9:20 AM

1. Uninstall Smart Array Multipath software, if installed. Refer to “Uninstalling

Smart Array Multipath Software Driver” in this chapter.

2. Upgrade to Windows Server 2003.

3. Install Smart Array Multipath software v2.0 or later. Refer to “First-Time

Installation” in this chapter.

Upgrading from v1.0 to v2.0

1. Uninstall Smart Array Multipath software v1.0. Refer to “Uninstalling Smart

Array Multipath Software Driver” in this chapter.

2. Install Smart Array Multipath software v2.0 or later. Refer to “First-Time

Installation” in this chapter.

Uninstalling Smart Array Multipath Software Driver

To uninstall the software:

CAUTION: Before uninstalling the software driver in a Microsoft Windows

Server 2003 clustering environment, use the Cluster Administrator to stop the cluster

service on the appropriate node.

1. Power down the server.

2. Disconnect all SCSI cables from any Smart Array 532 Controllers in the system,

unless the boot drive is attached.

3. Power up the server.

4. Select Start>Settings>Control Panel.

5. Select Add/Remove Programs.

6. From the list of components, select Compaq Smart Array Redundancy Filter

Driver.

NOTE: For Microsoft Windows Server 2003 only, the selection is Compaq Smart Array

Multipath Driver.

7. Click Change/Remove.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 38 39

Nessun commento

HP Modular Smart Array 500 Starter Kit Manuale Utente Pagina 27