Hp StorageWorks 500 G2 Modular Smart Array Manuale Utente Scaricare il pdf (Pagina 46)

46 HP StorageWorks MSA500 G2 Storage System User Guide

After choosing the configuration that best suits your needs, enable SSP with

ACU Version 7.10 or later. Locate ACU on the SmartStart CD. For instructions,

refer to the HP Array Configuration Utility User Guide on the Documentation

CD.

Other configurations

For four-node SSP configurations, refer to the documentation that ships with the

4-Port Shared Storage Module.

For multipath software configurations, refer to the HP Smart Array Multipath

Software User Guide that ships with that option.

For more information about these options, refer to the HP website

(http://www.hp.com/products/sharedstorage

Cabling the storage system

After installing the storage system in a rack, connect the SCSI cables and power

cords to the rear panel.

SCSI cabling guidelines

Always be sure that the servers attached to the storage system are powered down

and power cords are disconnected before connecting SCSI cables.

IMPORTANT: Before installing the Smart Array Multipath software on a

server with a Microsoft® operating system, connect only one of the

SCSI cables from each server to the MSA500 G2 storage system.

Leave the second SCSI cable for the redundant path disconnected until

after the multipath software is installed.

For SSP cabling configurations, refer to "SSP Hardware Configurations (on page

)."

Cluster cabling guidelines

To cable the cluster:

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 152 153

Nessun commento

Hp StorageWorks 500 G2 Modular Smart Array Manuale Utente Pagina 46