Hp StorageWorks 1510i Modular Smart Array Manuale Utente Scaricare il pdf (Pagina 33)

Fundamental ta

sks, in initial conﬁguration sequence

Conﬁguring a ne

w system includes the following tasks, performed in the following sequence:

•Conﬁguring management and data ports

•Conﬁguring hard drives

•Creatingstor

age targets

• Adding authorized initiators

Conﬁguring management and data ports

As described in the installation documents, the array connects to the network switch from its Ethernet

iSCSI module.

IMPORTANT:

In dual-controller conﬁgurations, an additional Ethernet iSCSI module is installed in the chassis, providing

the redundant path to a separate iSCSI network switch. Ports on both modules must be conﬁgured.

When conﬁguring management and data ports, consider the following:

• Isolate management trafﬁcfromstoragetrafﬁc, by assigning IP addresses in different LAN

segments.

• Assign one (or more) IP addresses to each port, and then assign one (or more) TCP portals

to each IP address.

• Enable/disable the following management services as needed for your environment:

• TELNET (default: disabled)

•SSH(default:enabled)

• HTTP (default: enabled)

•HTTPS(default:enabled)

• SNMP (default: enabled)

• Assign IP addresses and TCP portals to the data ports as outlined on your Path/Accessibility

Diagram. (When conﬁguring the storage targets, each target is assigned to a speciﬁcgroupofIP

portals, controlling access to the storage and the ﬂ ow of storage trafﬁc.)

NOTE:

The maximum supported number of IP addresses and portals may differ, depending on the storage system

and the model of its supported array controller. See your system user documents for more information.

Conﬁguring the management port

IMPORTANT:

Dual-controller conﬁgurations should conﬁgure the management port associated with each controller.

• The default management port for controller A is MA0.

• The default management port for controller B is MB0.

1. To clarify the display, expand the View as drop-down box and select the iSCSI view.

2. Expand (+) the component list for an installed MSA1510i controller.

HP Storage Management Utility user guide

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 98 99

Nessun commento

Hp StorageWorks 1510i Modular Smart Array Manuale Utente Pagina 33