Hp VMA-series Memory Arrays Manuale Utente Scaricare il pdf (Pagina 98)

98 HP VMA SAN Gateway User’s Guide AM456-9026A

4. (Optional) Use the name parameter to create a more intuitive name for the container ID. In the

following example, the generated container ID is changed to FASTBOX1:

5. Confirm that you want to initialize the HP VMA-series Memory Array.

A message confirms that the HP VMA-series Memory Array was successfully initialized.

Viewing Containers

Before a block media device can be used for block storage, it must be enabled. Once enabled, you

can see the container. The following task shows you how to use the

media block id <id>

enable

command to enable the device, then use the show containers command to view existing

containers.

To view existing containers, complete the following steps:

1. Log in as an administrator to the master SAN Gateway attached to Port 1 of the HP VMA-

series Memory Array.

2. Enter Configure mode using the following commands.

3. Enter the media block id all enable command to enable all block containers.

The

block parameter ensures that you enable vSHARE. The all parameter ensures that every

block container is enabled.

(config) # media init device ata-VIOLIN_MEMORY_ARRAY_23108R00000043

type block name FASTBOX1

Really initialize ata-VIOLIN_MEMORY_ARRAY_FASTBOX1 (all data will be

lost)? [no] y

media init completed successfully

SM076 [MY-vSHARE00: standby] (config) #

> enable

# configure terminal

(config) #

(config) # media <tab>

(config) # media block id all enable

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 264 265

Nessun commento

Hp VMA-series Memory Arrays Manuale Utente Pagina 98