Hp VMA-series Memory Arrays Manuale Utente Scaricare il pdf (Pagina 195)

AM456-9026A HP VMA SAN Gateway User’s Guide 195

Sets (or clears) a global communication value for all TACACS+ servers. Can be overridden in a

tacacs-server host command. Sets the shared secret text string used to communicate with any

TACACS+ server.

Add a TACACS+ Authentication Server

[no] tacacs-server host {hostname , ip-address} [auth-port <port-

number>][auth-type {ascii, pap}] [timeout <seconds>] [retransmit

<retries>][key <string>]

Add a TACACS+ server to the set of servers used for authentication. Some of the parameters given

may override the configured global defaults for all TACACS+ servers. The

auth-port is used for

authentication requests. The

auth-type specifies which of the two currently supported

authentication methods will be used.

The same IP address can be used in more than one

tacacs-server host command as long as

the

auth-port is different for each. auth-port is a UDP port number. auth-port must be

specified immediately after the host option (if present).

no tacacs-server host {hostname , ip-address} is specified, all tacacs-specific

configuration for this host is deleted.

no tacacs-server host {hostname , ip-address}

auth-port <port>

may be specified to refine which host is deleted, as the previous command

will delete all TACACS+ servers with the specified ip-address.

TACACS+ servers are tried in the order they are configured.

Show the TACACS+ Configuration

show tacacs

Show the TACACS+ configuration.

Note: Currently there is no “single-connection” option on a per TACACS+ server basis.

SSH Configuration

This section provides the syntax for ssh server commands, along with an explanation of the

functionality of each command.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 264 265

Nessun commento

Hp VMA-series Memory Arrays Manuale Utente Pagina 195