Hp ProLiant WS460c Gen8 Graphics Server Blade Manuale Utente Scaricare il pdf (Pagina 54)

Hardware options installation 54

Install the DIMM.

8. Install all DIMM baffles.

9. Install the access panel (on page 16).

To configure the memory mode, use RBSU ("HP ROM-Based Setup Utility" on page 72).

Mezzanine card option

Optional mezzanine cards are classified as Type A mezzanine cards and Type B mezzanine cards. The type

of the mezzanine card determines where it can be installed in the workstation blade.

• Install Type A mezzanine cards on Mezzanine 1 connector or Mezzanine 2 connector.

• Install Type B mezzanine cards on Mezzanine 2 connector.

Optional mezzanine cards enable network connectivity or provide Fibre Channel support. For mezzanine

card locations, see the system board components (on page 10).

When installing a mezzanine option on mezzanine connector 2, processor 2 must be installed.

For mezzanine card mapping, see the HP ProLiant WS460c Gen8 Graphics Server Blade and Expansion

Blade Installation Instructions or see "Interconnect bay numbering and device mapping (on page 38)."

To install the component:

1. Power down the workstation blade (on page 14).

2. Remove the workstation blade (on page 15).

3. Remove the access panel (on page 16).

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 97 98

Nessun commento

Hp ProLiant WS460c Gen8 Graphics Server Blade Manuale Utente Pagina 54