HP 80ex Manuale Utente Scaricare il pdf (Pagina 45)

Chapter 3 3-13

Operating the Jukebox

Using the Front Panel Features

Operating the

Jukebox

information about checking the SCSI bus status. If your computer is connected to a

LAN, be sure to check with your system administrator before turning off power to

the jukebox.

13. Turn the jukebox OFF, then ON to save the code to the jukebox flash ROM.

Setting Non-Security Configurations

Start with READY in the display.

1. Press

NEXT until CONF * displays.

2. Press

ENTER. CONF 0 and a flashing 0 displays.

3. Press

NEXT until the number of the option you want to change displays. NO

CONFIG displays if you choose an invalid number.

4. Press

ENTER.

The current default setting displays. It may be any one of these settings

• OFF or ON

•a number

5. Select the option you want by pressing

NEXT or PREV.

6. Press

ENTER. SET displays.

7. Press

CANCEL to exit.

CAUTION The next step is to turn off the jukebox.

Do not turn off power to the jukebox until you are sure the SCSI bus is inactive.

Removing power from a SCSI peripheral when the bus is active can result in data

loss and/or indeterminate bus states. Check your host system manuals for

information about checking the SCSI bus status. If your computer is connected to a

LAN, be sure to check with your system administrator before turning off power to

the jukebox.

8. Turn the jukebox OFF, then ON to save the code to the jukebox flash ROM.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 95 96

Nessun commento

HP 80ex Manuale Utente Pagina 45