Hp XP Array Manager Software Manuale Utente Pagina 98
- Pagina / 105
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Table 18 Available Configuration Values for the [LDEV] Tag
Column
Item
Available Value
1st, 11th (Index) Ldkc
00
2nd, 12th (Index)
Cu
00 - FE. Set with hexadecimal numbers in one or two
digits.
3rd, 13th (Index) Ldev
00 - FF. Set with hexadecimal numbers in one or two
digits.
4th, 14th
Cmd. Dev
(Command Device)
Enable or Disable (The default when the spreadsheet is
exported)
ON or OFF are also available as the set value when you
write the spreadsheet.
5th, 15th
Cmd. Sec
(Command Device
Security)
Enable or Disable (The default when the spreadsheet is
exported)
ON or OFF are also available as the set value when you
write the spreadsheet.
6th, 7th,
16 th, 17t h
Blank
Error Check
First Error Check
The first error check is performed when the spreadsheet file is imported. The first error check verifies
that the spreadsheet is properly formatted. If there is an error, the spreadsheet is rejected, and an error
message is displayed. Errors detected at this first check include the following:
• The first row of the spreadsheet (the declaration line) is not correctly written, or the
stated program product is not installed. For more information on the declaration line, see
“Spreadsheet Declaration” on page 87.
• The spreadsheet file is not in text file format (the fi le is a binary file).
• There is no function tag in the spreadsheet. For more information on the function tag, see
“Function Tags” on page 87.
• The file name is incorrect (for example, the extension is not .spd, or the fi le name exceeds the
maximum number of letters).
• The number of letters in a row exceeds 200.
• The number of rows in a spreadsheet exceeds 400,000.
Second Error Check
In the second check, the spreadsheet settings are verified. Any errors found are displayed on the
Error Information list. This second check is performed before the Apply button becomes available.
Figure 48 on page 99 shows the flow of the second check.
The second error check consists of two different types of the checks. These checks are shown in
Figure 48 on page 99 as the Level 1 and Level 2. The Level 2 check is performed only when no error is
found by the Level 1 check. Each level of the check of the second error check detects the following errors:
• Level 1 check (the format and parameters are checked):
• A function tag is not supported.
• A setting value is incorrect or omitted.
• The setting range is incorrect. The correct ranges are as follows:
LDKC:00
CU:00 - FE
98
Performing LUN Manager Operations Using Configuration File Loader
- HP StorageWorks 1
- Edition 2
- Description 2
- Contents 3
- Figures 6
- Subscription Service 11
- HP Websites 11
- Documentation Feedback 11
- About this Guide 12
- XP LUN Manager Operations 13
- Caution: 15
- About LUN Manager Operations 16
- Configuring LUN Security 17
- 3 Preparing for LUN Manager 19
- Operations 19
- 4 Using the LUN Manager GUI 21
- LU Path List 22
- Figure 6 The LU Path List 23
- The WWN List 24
- LDEV List 24
- Figure 8 The L 25
- DEV List 25
- Port Window 26
- Port List 27
- Change Port Mode Box 27
- Port Tree 29
- Port Informati 30
- FC Switch I 30
- Authentica 32
- 5PerformingLUN Manager 33
- Finding WWN for HP-UX 35
- Finding WWN for Solaris 36
- Creating Ho 37
- Overview 43
- Switch Authentication 47
- Port Authentication 54
- Setting the 58
- Switch Authentication Mode 58
- Deleting 60
- Warning: 61
- Deleting Host Groups 62
- Setting the Fi 65
- Initiator/External Mix Mode 66
- Viewing a L 77
- Deleting LU Paths 78
- Using LUN Security 80
- Enabling LUN Security 81
- Disabling LUN Security 81
- Deleting Command Devices 82
- Related topic 83
- 6PerformingLUN Manager 85
- File Loader 85
- Spreadsheet Com 87
- Configuration Definitions 88
- Comments 89
- LUN Manager Spre 90
- Setting the CHA Mode 91
- Port Setti 92
- Setting the H 93
- Setting the WWN Information 95
- Setting the LU Path 96
- Error Check 98
- Third Error Check 99
- 7 Troubleshooting 101
- Troubleshooting 102
- AGlossary, Acronyms, and 103
- Abbreviations 103
Prodotti e manuali riguardandi Magazzini Hp XP Array Manager Software
(122 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.059 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale