Hp XP Array Manager Software Manuale Utente Scaricare il pdf (Pagina 43)

•

Deleting user information for hosts (see “Deleting Host User Information”onpage52)

• Specifying user information for host groups (when performing mutual authentication, see

“Registering Host Group User Information” on page 53)

• Clearing user information for host groups (when performing mutual authentication, see

“Clearing Host Groups User Information” on page 54)

•

Specifying the information for Fibre Channel port (see “Setting Port Information” on page 54)

• Registering user information on a Fibre Channel port (see

“Setting Port User Information”onpage55)

• Registering user information on a Fibre Channel switch (see

“Setting Switch User Information” on page 56)

• Clearing user information for a Fibre Channel switch (see

“Clearing Switch User Information” on page 57)

• Specifying an authentication mode of Fibre Channel switch (see

“Setting the Switch Authentication Mode” on page 58)

• Specifying whether a Fibre Channel switch can perform authentication (see

“Enabling or Disabling Switch Authentication” on page 58)

Notes:

The hosts to be connected also have to be conﬁgured for authentication by host groups (and

for authentication of host groups by the host, if required). For details on how to conﬁgure the host

for CHAP authentication, see the documentation of the operating system and Fibre Channel driver in

your environment.

Overview

When co

nﬁguring a Fibre Channel environment, you can use LUN Manager to set user authentication

betwee

n ports of the storage system and hosts. In a Fibre Channel environment, the ports and hosts use

Null DH

-CHAP (Challenge Handshake Authentication Protocol with a Null Difﬁe-Hellmann algorithm) as

the au

thentication method. This section provides an overview of user authentication.

Note

: Throughout this manual, Null DH-CHAP is sometimes referred to as CHAP.

The operation of user authentication in a Fibre Channel environment involves the following three phases:

1. A host group of the storage system authenticates a host that attempts to connect. (authentication

of hosts)

2. The host authenticates the connection-target host group of the storage system. (authentication

of host groups)

Caution:

Because the host bus adapters currently do not support this function, this authentication

pha

se is unusable in the Fibre Channel environment.

3. A target port of the storage system authenticates a Fibre Channel switch that attempts to connect.

(authentication of Fibre Channel switches)

The storage system performs user authentication by host groups. Therefore, the host groups and hosts

need to have their own user information for performing user authentication.

When a host attempts to connect to the storage system, the authentication of hosts phase starts. In this

phase, it is determined whether the host group requires authentication of the host. If the host group

does not require authentication of the host, then the host will connect to the storage system without

authentication. If the host group requires it, authentication will be performed for the host. When the host

is authenticated successfully, the processing goes on to the next phase.

After the authentication of the host succeeds, if the host requires user authentication for the host group

that is the connection target, the authentication of host groups phase starts. In this phase, the host groups

and hosts authenticate with each other, that is, mutual authentication.In the authentication of host groups

phase, if thehostdoesnot requireuserauthenticationfor thehost group,the host will connect to the

storage system without authentication of the host group.

The following explains the settings required for user authentication. The settings for authentication of host

groups are needed only when you want to perform mutual authentication.

• Settings for authentication of hosts

XP24000 LUN Manager User's Guide

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 104 105

Commenti su questo manuale

Nessun commento

Hp XP Array Manager Software Manuale Utente Pagina 43

Commenti su questo manuale

Prodotti e manuali riguardandi Magazzini Hp XP Array Manager Software