Hp Unified Extensible Firmware Interface Manuale Utente Scaricare il pdf (Pagina 60)

Figure 50 Server Availability — Thermal Shutdown screen

Remotely Powering On the Server

Configure the server to power on remotely when it receives a special packet. If you enable the

Wake-On LAN option, the system can be powered up remotely using a WOL-capable NIC. This

option requires a NIC, NIC driver, and operating system that are WOL-capable. If you choose

the enabled option, the following caution appears:

When enabling Wake-on LAN, remove all power cords before adding or

removing any adapters. Some adapters can cause the system to power on

when added or removed.

To remotely power-on the server:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→Server Availability and select Wake-On LAN and press Enter.

2. Select one of the following options:

• Enabled

• Disabled (default)

3. Press F10 to save your selection.

60 Accessing the System Configuration Menu

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 157 158

Nessun commento

Hp Unified Extensible Firmware Interface Manuale Utente Pagina 60