Hp Unified Extensible Firmware Interface Manuale Utente Scaricare il pdf (Pagina 50)

Figure 41 Advanced Power Management — Minimum Processor Idle Power Core State screen

Setting Minimum Processor Idle Power Package State

NOTE: This option is available on servers with Intel processors.

Configure the lowest processor idle power state (C-state). The processor automatically transitions

into package C-states based on the Core C-states in which cores on the processor have transitioned.

The higher the package C-state, the lower the power usage of that idle package state. Package

C6 (non-retention) is the lowest power idle package state supported by the processor. Configure

this option only when HP Power Profile is set to Custom.

To set minimum processor idle power package state:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→Power Management→Advanced Power Options→Minimum Processor Idle Power

Package State and press Enter.

2. Select one of the following options:

• Package C6 (retention) State

• Package C6 (non-retention) State

• No Package State

3. Press F10 to save your selection.

50 Accessing the System Configuration Menu

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 157 158

Nessun commento

Hp Unified Extensible Firmware Interface Manuale Utente Pagina 50