HP Integrity NonStop H-Series Guida Utente Scaricare il pdf (Pagina 154)

HP NonStop Shadowbase Command Definitions

Consumer Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

145

Client Server Extended Open Target

The default behavior is for the NonStop Consumer to start and issue the

connect to the target HP Shadowbase Other Servers when

NETSWAPCONNECT OFF.

Set NETSWAPCONNECT ON (and a corresponding non-zero value in the

target HP Shadowbase Other Servers shadparm.ini file for parameter

SHAD_NETSWAP_CONNECT) in order for the CONS to start and wait for

a connect request from the Open Target.

Note that the CONS continues to replicate to the non-NSK system.

NETSWITCHONERROR { ON }

{ OFF }

Initial Changed

Version Version Values Default Minimum Maximum Alter

4.092 ON OFF ON Yes

Client Server Extended Open Target

This parameter is used to indicate if the Consumer should try to reconnect

on the current STP tcp/ip path before switching over to the alternate path.

The default is ON which causes the Consumer switchover to the alternate

path following an error. Setting this parameter OFF causes the Consumer

to retry the current path (socket) before switching over to the backup path

settings. Note that this parameter can be altered at any time.

NETTIMEOUT seconds

Initial Changed

Version Version Values Default Minimum Maximum Alter

1.101 2.500 300 1 32767 Yes

Client Server Extended Open Target

Defines how many seconds the HP Shadowbase Consumer waits for

acknowledgment from the HP Shadowbase Other Servers following a

send. The default value is 300 seconds (5 minutes). The minimum value

is 1 and maximum is 32767.

NETUSERNAME username

Initial Changed

Version Version Values Default Value Specifications Alter

3.900 None Alphanumeric up to 31 bytes No

Client Server Extended Open Target

This is used for authorizing an STP connection used for a TCP/IP

replication environment. NETUSERNAME is also used during the

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 345 346

Nessun commento

HP Integrity NonStop H-Series Guida Utente Pagina 154