HP Access Control Guida di Avvio Rapido Scaricare il pdf (Pagina 16)

Figure 4-5 Tracking settings

In the Tracking section, select what device information you want to display in job accounting reports when

HP FutureSmart devices are configured for tracking.

●

Select Device name to display the device names in job accounting reports.

●

Select Network name to display the host names of devices in job accounting reports. Make sure the Get

community name is entered in the SNMP section to be able to read the network/host names of devices.

Figure 4-6 OPS server settings

With the OPS Server, you can configure HP Officejet Pro single-function and multi-function devices for

authentication and pull printing. When Agent or Secure Pull Print Express is installed on the server, the OPS

Server is installed and started. For more information about configuring HP Officejet Pro devices, see the HP

Access Control (HP AC) Secure Pull Print Express Admin Guide.

In the OPS Server section, make sure the OPS Server field displays the correct server name where OPS is

installed. Also, make sure port 8081 is open for connection between the OPS Server and HP Officejet Pro

devices.

Click the Override OPS settings if you will be configuring an Officejet Pro printer that was previously

configured on a different server. This checkbox allows you to override previous configuration settings when

the printer is configured on the current server.

Enter the correct User name and Password that was set up during the installation of OPS Server.

NOTE: The OPS password can be changed by reinstalling OPS. The opssetup.exe installation file can be

found in the C:\Program Files\Hewlett-Packard\HP Access Control\Misc folder.

Click Test to test the connection to the OPS Server and make sure port 8081 is open.

Figure 4-7 SNMP settings

In the SNMP section, set the Get and Set community names for communication to and from devices. The Get

community name allows the server to retrieve device and tracking data from a configured device. The Set

community name allows the server to send information to the device, such as a reboot command. By default,

8 Chapter 4 Settings tile

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 70 71

Nessun commento

HP Access Control Guida di Avvio Rapido Pagina 16