HP StorageWorks 20 - Modular Smart Array Specifiche Pagina 35
- Pagina / 84
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Weight warning
WARNING!
The device can be very heavy. To reduce the risk of personal injury or damage to equipment:
• Remove all hot-pluggable power supplies and modules to reduce the overall weight of the device
before lifting.
• Observe local health and safety requirements and guidelines for manual material handling.
• Get help to lift and stabilize the device during installation or removal, especially when the device is
not fastened to the rails. When a device weighs more than 22.5 kg (50 lb), at least two people must
liftthecomponentintotheracktogether.Ifthecomponentisloadedintotherackabovechestlevel,a
third person must assist in aligning the rails while the other two support the device.
Rack warnings and precautions
Ensure that precautions have been taken to provide for rack stability and safety. It is important to follow
these precautions providing for rack stability and safety, and to protect both personnel and property.
Heed all cautions and warnings included in the installation instructions.
WARNING!
To reduce the risk of personal injury or damage to the equipment:
• Observe local occupational safety requirements and guidelines for heavy equipment handling.
• Obtain adequate assistance to lift and stabilize the product during installation or removal.
• Remove all pluggable power supplies and modules to reduce the weight of the product.
• Load the heaviest item first, and load the rack from the bottom up. This makes the rack “bottom-heavy”
and helps prevent the rack from becoming unstable.
• Extend the leveling jacks to the floor.
• Restthefullweightoftherackonthelevelingjacks.
• Attach stabilizing feet to the rack if it is a single-rack installation.
• Ensure the racks are coupled in multiple-rack installations.
• Fully extend the bottom stabilizers on the equipment. Ensure that the equipment is properly
supported/braced when installing options and boards.
• Be careful when sliding rack components with slide rails into the rack. The slide rails could pinch
your fingertips.
• Ensure that the rack is adequately stabilized before extending a rack component with slide rails
outside the rack. Extend only one component at a time. A rack may become unstable if more
than one component is extended for any reason.
• Do not attempt to move a fully loaded equipment rack. Remove equipment from the rack before
moving the rack.
• At least two people are needed to safely unload the rack from the pallet. An empty 42U rack weighs
115 kilograms (253 pounds), is over 2.1 meters (7 feet) tall, and can become unstable when being
moved on its casters. Do not stand in front of the rack as it rolls down the ramp from the pallet;
handleitfromthesides.Stabilizethedevicebykeepingtheunitontherails.
1510i Modular Smart Array maintenance and service guide
35
- HP StorageWorks 1
- Contents 3
- About this guide 7
- Document c 8
- Rack stability 9
- HP technical support 9
- Customer self repair 9
- Subscription service 9
- HP websites 9
- Documentation feedback 10
- 1 Illustrated parts list 11
- 2Specifications 13
- Chassis specifi 14
- Fan module spec 15
- SCSI I/O module specifications 15
- Power sup 15
- Specifications 16
- 3 System components and LEDs 17
- Rear view 18
- Chassis and com 19
- Controller LEDs 20
- Hard drive LEDs 21
- SATA hard drive 23
- Slot diagram LE 24
- The 2-Port Ethe 25
- Fan module LEDs 26
- SCSI I/O module LEDs 27
- Power supply module LEDs 28
- 4 Available diagnostic tools 29
- Available diagnostic tools 30
- 5 Customer replaceable 31
- Customer self 32
- Recommended to 33
- Warnings and precautions 33
- Equipment symbols 34
- Weight warning 35
- Rack warnings and precautions 35
- Determinin 37
- Powering off the MSA 38
- Powering on the MSA 39
- Removing or inst 40
- Removing or ins 41
- Replacing a har 42
- Verifying component failure 43
- Removing the hard drive 43
- Installing the hard drive 44
- Replacing the c 46
- Removing the controller 47
- Installing the controller 52
- Verifying proper operation 52
- Replacing a 2-P 53
- Replacing a fan 55
- Replacing a SCS 57
- II/Omodule 57
- Replacing a pow 59
- Installing the p 60
- Replacing the M 61
- SA1510i chassis 61
- Prepareforthereplacement 62
- Remove the fan modules 62
- Remove the SCSI I/O modules 63
- Remove the controllers 63
- Remove the MSA from the rack 64
- Record th 64
- Install the MSA in the rack 64
- Install the controllers 65
- Install the SCSI I/O modules 66
- Install the fan modules 66
- Completing the replacement 67
- A Regulatory compliance and 69
- Laser compliance 70
- International n 71
- Japanese notice 72
- Korean notice (A&B) 72
- Battery Replacement notice 73
- Power cords 73
- Japanese Power Cord notice 73
- Electrostatic d 74
- Czechoslovakian notice 74
- Danish notice 75
- Dutch notice 75
- English notice 75
- Estonian notice 75
- Finnish notice 76
- French notice 76
- German n 76
- Greek notice 76
- Hungarian notice 77
- Italian notice 77
- Latvian notice 77
- Lithuanian notice 78
- Polish notice 78
- Portuguese notice 78
- Slovakian notice 78
- Slovenian notice 79
- Spanish notice 79
- Swedish notice 79
Prodotti e manuali riguardandi Tavolini per PC/Workstation HP StorageWorks 20 - Modular Smart Array
Tavolini per PC/Workstation HP Pre3 Guida Utente
(234 pagine)
(234 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.029 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale