Hp LXR 8000 Manuale Utente Scaricare il pdf (Pagina 83)

NOTE To protect hub ports, port covers should remain installed in all unused ports.

3. Connect Cascading HP FC-AL Hubs

If using cascading hubs, connect the two HP FC-AL hubs to each other.

• If connecting short-wave hubs, refer to figure 28.

• If connecting long-wave hubs, refer to figure 29.

– When installing long-wave cascading hubs (HP A4839A), make sure the long-wave port (Port 10) is connected only

to the long-wave port (Port 10) on the other long-wave hub.

4. Connect the FC I/O Adapter to the HP FC-AL Hub

a. Connect the HP FC-AL hub to the FC I/O adapter on each HP NetServer.

Figure 22. An example of an HP FC-AL hub connected to an HP NetServer LXr Pro8

Figure 23. An example of an HP FC-AL hub connected to two HP NetServer LXr Pro8s

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 94 95

Nessun commento

Hp LXR 8000 Manuale Utente Pagina 83