Hp LXR 8000 Manuale Utente Scaricare il pdf (Pagina 48)

HP NetServer Installation Guide 34

Disk Administrator, All Disk Arrays Partitioned and Committed

Assign Drive Letters

Disk Administrator has assigned sequential and temporary drive letters to the disk arrays you partitioned.

You must assign a permanent (static) drive letter to each drive you want to make available to both Systems A

and B.

NOTE When partitioning logical drives with Windows NT the logical drive letters are

sequentially assigned in a predefined sequence. These drive letters are temporary

assignments that can change according to the drives installed in your system. For

clustered systems it is critical that the drive letters for the shared storage drives be fixed.

Therefore, make sure that you assign permanent drive letters to the shared logical drives.

1. Select one of the disks you just partitioned.

Disk Administrator highlights the selected disk.

2. From the Disk Administrator’s Tools menu, choose Assign Drive Letter.

Disk Administrator displays the Assign Drive Letter dialog.

3. In the dialog, select a drive letter, and click OK.

To avoid confusion later, HP recommends that you choose sequential drive letters. The example in this

guide uses drive letters X and Y.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 94 95

Nessun commento

Hp LXR 8000 Manuale Utente Pagina 48