Hp ProLiant ML110 G7 Server Manuale Utente Scaricare il pdf (Pagina 54)

Hardware options installation 54

Install the TPM board. Press down on the connector to seat the board.

7. Install the TPM security rivet by pressing the rivet firmly into the system board.

8. Install the rear system fan.

9. Install the access panel (on page 21).

10. Lock the tower bezel.

11. Connect each power cord to the server.

12. Connect each power cord to the power source.

13. Power up the server (on page 19).

Retaining the recovery key/password

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after

BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery

key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system

integrity.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 112 113

Nessun commento

Hp ProLiant ML110 G7 Server Manuale Utente Pagina 54