Hp Netserver E Server series Manuale Utente Scaricare il pdf (Pagina 42)

Chapter 5 Error Message Reference

Code Description Recommended Action

2. If necessary, update the BIOS.

3. Clear the CMOS and rerun configuration. See directions on the technical

reference label or card.

4. Make sure the system board is seated.

5. Check the seating of the voltage regulator module (VRM) if present.

6. Be sure the processor board (if any) is seated.

7. Make sure the CPU chip is seated. (Take ESD precautions.)

8. Make sure the memory elements (DIMMs) are properly seated.

9. Check system fans. If overheating occurs, chip may shut down.

10. If the system ran with temperature high, let it cool for 30 minutes, then

restart.

11. If system repeatedly shows this error, replace the element with the CMOS.

00A1h NVRam buffer size

is too big

1. Run the BIOS Setup program and reconfigure all settings.

2. If necessary, update the BIOS.

3. Clear the CMOS and rerun configuration. See directions on the technical

reference label or card.

4. Make sure the system board is seated.

5. Check the seating of the voltage regulator module (VRM) if present.

6. Be sure the processor board (if any) is seated.

7. Make sure the CPU chip is seated. (Take ESD precautions.)

8. Make sure the memory elements (DIMMs) are properly seated.

9. Check system fans. If overheating occurs, chip may shut down.

10. If the system ran with temperature high, let it cool for 30 minutes, then

restart.

11. If system repeatedly shows this error, replace the element with the CMOS.

00A2h ESCD size is too

small.

1. Run the BIOS Setup program and reconfigure all settings.

2. If necessary, update the BIOS.

3. Clear the CMOS and rerun configuration. See directions on the technical

reference label or card.

4. Make sure the system board is seated.

5. Check the seating of the voltage regulator module (VRM) if present.

6. Be sure the processor board (if any) is seated.

7. Make sure the CPU chip is seated. (Take ESD precautions.)

8. Make sure the memory elements (DIMMs) are properly seated.

9. Check system fans. If overheating occurs, chip may shut down.

10. If the system ran with temperature high, let it cool for 30 minutes, then

restart.

11. If system repeatedly shows this error, replace the element with the CMOS.

00A3h ESCD Size is too

big.

1. Run the BIOS Setup program and reconfigure all settings.

2. If necessary, update the BIOS.

3. Clear the CMOS and rerun configuration. See directions on the technical

reference label or card.

4. Make sure the system board is seated.

5. Check the seating of the voltage regulator module (VRM) if present.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 84 85

Commenti su questo manuale

Nessun commento

Hp Netserver E Server series Manuale Utente Pagina 42

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware del computer Hp Netserver E Server series