Hp HSG Array Controller Manuale Utente Pagina 47
- Pagina / 248
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Managing the Switch 3-13
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Domain
Pressing <Enter>, while Domain is selected, displays:
Domain
1
The domain number uniquely identifies the Switch in a Fabric. This Switch ID
is normally automatically assigned by the Switch and may be any value
between 0 and 31. You may also assign the initial domain number manually.
The Switch with the lowest initial domain will become the master Switch and
control the configuration.
BB_credit
Pressing <Enter>, while BB_credit is selected, displays:
BB_credit
16
The number represents the number of buffers, from 1 to 16, available to the
host. The default for G_Port cards is 16. The BB_credit for FL_Port cards is 0.
For a complete description of buffer-to-buffer credit, refer to the industry
specification Fibre Channel Physical and Signalling Interface (FC-PH).
R_A_TOV
Pressing <Enter>, while R_A_TOV is selected, displays:
R_A_TOV
10000
Resource Allocation Time Out Value (R_A_TOV) is adjustable in 1-second
increments using front panel controls, but its value is displayed in
milliseconds. This variable works with the variable E_D_TOV to determine
the Switch’s actions when presented with an error condition. Allocated circuit
resources with detected errors are not released until the time value has expired.
If the condition is resolved prior to the timing out, the internal time out clock
resets and waits for the next error condition. The range is 1 to 120 seconds.
NOTE: The set value must be larger than the set value for the Error Detect Time Out Value
- StorageWorks Fibre Channel 1
- First Edition (April 1999) 2
- Contents 3
- Chapter 3 4
- Chapter 4 5
- Chapter 5 5
- Chapter 6 6
- Appendix A 7
- Appendix B 7
- Appendix C 8
- List of Figures 9
- List of Tables 11
- About This Guide 13
- Symbols on Equipment 14
- Rack Stability 15
- Getting Help 15
- Compaq Website 16
- Compaq Authorized Reseller 16
- Introduction 17
- Front Panel Features 18
- Introduction 1-3 19
- Installing the Switch 20
- Table 2-1 21
- Universal Mounting Kit Parts 21
- Cooling Air Requirements 22
- Power Requirements 22
- Mounting) 23
- RETMA 41U Rack 24
- Compaq Rack 25
- Installing the Switch 2-7 26
- SHR-1390 27
- Installing the Switch 2-9 28
- CAUTION: 29
- Installing GBIC Modules 30
- Host to the Switch 31
- Installing the Switch 2-13 32
- Table 2-3 33
- Port LED Status Indicators 33
- Installing the Switch 2-15 34
- Managing the Switch 35
- Table 3-1 36
- Managing the Switch 3-3 37
- Ethernet Port 38
- Managing the Switch 3-5 39
- Table 3-2 40
- Front Panel Control Buttons 40
- Activating Menu Display 41
- Table 3-3 42
- Managing the Switch 3-9 43
- Configuration Menu 44
- Ethernet Subnetmask 45
- Fibre Channel IP Address 45
- Fibre Channel Subnetmask 46
- Gateway Address 46
- BB_credit 47
- Operating Mode 48
- Virtual Channels 49
- VC Link Ctl 50
- VC Class 2 50
- VC Class 3 50
- VC Multicast 50
- VC Priorities 51
- Alternate BB_credit 51
- Open/Opened BB_credit 52
- Frame Collection 52
- Reset to Default 52
- Operation Menu 53
- Port Enable 54
- Close Telnet 54
- Status Menu 55
- Booted At 56
- Firmware Date 56
- Flash Date 56
- Boot Prom Date 56
- Port Type 57
- Module Type 58
- Port Throughput 58
- Temperature 59
- Error Log 60
- Test Menu 61
- Managing Via Telnet 61
- Table 3-8 62
- Default Username 62
- Managing with SNMP 63
- SNMPv1 Transports 65
- MIB-II Support 66
- Fabric Element MIB Support 66
- Specific MIBs 67
- Generic Traps 67
- Enterprise Specific Traps 67
- Agent Configuration 68
- Tools for Managing with SNMP 69
- HP OpenView SNMP Setup 71
- Managing the Switch 3-39 73
- Error Message Format 74
- Message Classification 75
- Switch configuration 76
- Managing the Switch 3-43 77
- StorageWorks Command Console 78
- Software 78
- Installation Summary 79
- Accessing Switch Web Tools 80
- Main Web Tools Screens 82
- Fabric View Page 83
- Fabric Topology View Page 83
- General Switch View Page 83
- Port Detail View Page 83
- License Installation 85
- Using Web Tools 87
- Table 5-2 94
- General Information Fields 94
- Table 5-3 95
- Table 5-4 98
- Port Detail View Page Fields 98
- Performance View Page 100
- Administrative Interface Page 102
- Table 5-5 103
- System Administration Fields 103
- Telnet Interface Page 106
- Popup Help Dialog Box 107
- Chapter 108
- Increased SAN Control 109
- The Simplicity of Zoning 110
- Zoning Specifications 112
- Zoning Concepts 113
- Zone Members 114
- Zone Aliases 114
- Zone Configurations 115
- Defined Configuration 115
- Effective Configuration 115
- Saved Configuration 115
- Using Zoning 116
- Zone Enforcement 117
- Setting Up Zones 117
- Zone Management Example 118
- Multi-Switch Fabrics 120
- Adding a New Fabric 121
- Merging Two Fabrics 121
- Splitting a Fabric 121
- Zoning Commands 122
- Table 6-1 123
- Zone Alias Commands 124
- Figure 6-4. aliAdd Command 125
- Zoning 6-19 126
- Zone Configuration Commands 127
- Zoning 6-21 128
- Figure 6-13. cfgShow Command 129
- Zone Commands 130
- Zoning 6-25 132
- Table 6-5 133
- Zoning 6-27 134
- Glossary 136
- Table A-1 137
- Switch Terminology 137
- Glossary A-3 138
- Glossary A-5 140
- Telnet Commands 141
- General Commands 142
- Telnet Commands B-3 143
- Fibre Channel Switch 144
- Field Support 144
- Table B-2 145
- Table B-3 147
- Telnet Commands B-9 149
- Table B-4 150
- Telnet Commands B-11 151
- Telnet Commands B-13 153
- Telnet Commands B-15 155
- Table B-5 157
- Telnet Commands B-19 159
- Telnet Commands B-21 161
- Table B-6 163
- , piling and bundling 164
- Telnet Commands B-25 165
- Telnet Commands B-27 167
- Telnet Commands B-29 169
- Table B-7 170
- Telnet Commands B-31 171
- Table B-8 172
- Telnet Commands B-33 173
- Special Inputs 175
- Examples 176
- Telnet Commands B-37 177
- Telnet Commands B-39 179
- Telnet Commands B-41 181
- Table B-9 182
- Telnet Commands B-43 183
- Telnet Commands B-45 185
- Table B-10 187
- Telnet Commands B-49 189
- Table B-11 190
- Telnet Commands B-51 191
- Telnet Commands B-53 193
- Telnet Commands B-55 195
- Table B-12 197
- Telnet Commands B-59 199
- Table B-13 200
- Telnet Commands B-61 201
- Diagnostic Commands 202
- Telnet Commands B-63 203
- Telnet Commands B-65 205
- Table B-14 207
- Telnet Commands B-69 209
- Telnet Commands B-71 211
- Telnet Commands B-73 213
- Table B-15 215
- Routing Commands 216
- Table B-16 217
- Table B-17 218
- Telnet Commands B-79 219
- Table B-18 221
- Telnet Commands B-83 223
- LSDbShow 224
- Telnet Commands B-85 225
- Table B-19 226
- Telnet Commands B-87 227
- Table B-20 229
- Table B-21 231
- Telnet Commands B-93 233
- Table B-22 234
- Telnet Commands B-95 235
- Table B-23 236
- License Commands 237
- Agency Notices 239
- Class A Equipment 240
- Class B Equipment 240
- Modifications 241
- European Union Notice 242
- Japanese Notice 243
- Taiwanese Notice 243
- Laser Devices 243
- Laser Safety Warnings 244
- Laser Product Label 244
- Laser Information 244
- Agency Notices C-7 245
- Index 3 248
Prodotti e manuali riguardandi Accessori per computer Hp HSG Array Controller
Accessori per computer Hp 3PAR Application Software Suite for Oracle License Manuale Utente
(199 pagine)
(199 pagine)
Accessori per computer Hp Hitachi Dynamic Link Manager Software Licenses Manuale Utente
(646 pagine)
(646 pagine)
Accessori per computer Hp XP P9000 Command View Advanced Edition Software Li Manuale Utente
(250 pagine)
(250 pagine)
(241 pagine)
(39 pagine)CDA CI330 manuali
Manuali dei proprietari e guide per l'utente per Lavatrici CDA CI330.
We fornisce 1 manuali pdf CDA CI330 per scaricare gratuitamente in base al tipo di documento: Specifiche
Commenti su questo manuale