Hp Dynamic Smart Array Controllers Manuale Utente Scaricare il pdf (Pagina 19)

Replacing, moving, or adding hard drives 19

Replacing, moving, or adding hard drives

Drive LEDs

HP Dynamic Smart Array RAID controllers support drive LED illumination only on systems with backplane

support for drive LEDs.

In addition, HP Dynamic Smart Array RAID controllers support HP Smart Carrier LED illumination. However,

LED functionality is provided only if the drives are authenticated through HP Smart Carrier.

Item LED Status Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue The drive carrier firmware is being updated or requires an update.

Activity ring Rotating green Drive activity

Off No drive activity

Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of

the logical drives to fail.

Off Removing the drive does not cause a logical drive to fail.

Drive status Solid green The drive is a member of one or more logical drives.

Flashing green The drive is rebuilding or is erasing.

Flashing

amber/green

The drive is a member of one or more logical drives and predicts

the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber The drive has failed.

Off

The drive is not configured by a RAID controller.

Recognizing hard drive failure

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 36 37

Nessun commento

Hp Dynamic Smart Array Controllers Manuale Utente Pagina 19