HP DreamColor Z31x Studio Display Manuale Utente Scaricare il pdf (Pagina 16)

Mounting the display

The display head can optionally be attached to a wall, swing arm, or other mounting xture.

NOTE: This apparatus is intended to be supported by UL or CSA Listed wall-mount bracket.

CAUTION: This display supports the VESA industry-standard 100 mm mounting holes. To attach a third-

party mounting solution to the display, four 4 mm, 0.7 pitch, and 15 mm-long screws are required. Longer

screws must not be used because they may damage the display. It is important to verify that the

manufacturer’s mounting solution is compliant with the VESA standard and is rated to support the weight of

the display panel. For best performance, it is important to use the power and video cables provided with the

display.

1. Remove the four screws from the VESA holes located on the rear of the display head.

2. Install the included back plate cover over the mounting screws on the rear of the display.

6 Chapter 1 Getting Started

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 110 111

Nessun commento

HP DreamColor Z31x Studio Display Manuale Utente Pagina 16