HP 220mx Manuale Utente Scaricare il pdf (Pagina 56)

3-16 Chapter 3

Operating the Jukebox

Setting the SCSI IDs

You may now view the SCSI ID and LUN numbers using VIEW ID’S, or set a

new SCSI ID number using SET ID’S. (See the following two sections.)

Viewing the Current SCSI IDs

READY > ADMIN * > SCSI ID’S * > VIEW ID’S >

BUS 1*

BUS 2*

NOTE If you are unfamiliar with basic SCSI addressing or LUN addressing, refer to

Appendix B.

Start with READY in the display.

1. Press

NEXT until ADMIN * displays, and then press ENTER.

2. Enter the administration password.

Instructions for entering this password are in “Entering the Administration

Menu Password” previously in this chapter.

3. Press

NEXT until SCSI ID’S displays, and then press ENTER.

4. VIEW ID’S displays. Press

ENTER.

5. BUS 1 * displays. If you want to view the IDs on Bus 1, press

ENTER.

If you want to view the IDs on Bus 2, press

NEXT until BUS 2 * displays and

then press

ENTER.

6. JKBX ID # LUN # or DRV # ID # LUN # displays. (JKBX ID # stands

for the current ID of the jukebox controller, DRV # ID # is the current ID

setting of the displayed drive number, and “LUN #” is the current logical unit

number.)

Press

NEXT or PREV to scroll through the current SCSI IDs and LUNs.

NOTE Tables in Appendix B show the default SCSI IDs and LUNs when LUN mode is

turned on.

7. Press

CANCEL twice to exit VIEW ID’S.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 119 120

Nessun commento

HP 220mx Manuale Utente Pagina 56