Hp StorageWorks 1000 Modular Smart Array Manuale Utente Scaricare il pdf (Pagina 46)

Controller Display Messages

46 MSA1000 Controller User Guide

83 DRIVE HOT

REMOVED BOX

#<n>, BAY <n>

Informational A SCSI drive has been

removed from the

MSA1000 or one of the

storage enclosures attached

to it.

84 DRIVE FAILURE

BOX #<n>, BAY

<n> 84

Error A SCSI drive in the

MSA1000 or one of the

storage enclosures attached

to it has failed. If the drive

was part of a configured

volume, then the state of

the volume will depend on

the fault tolerance used.

The drive should be

replaced as soon as

possible following the

guidelines in the

“Recovering from Hard

Drive Failure” section in

this guide (Appendix E).

85 BAD DRIVE

FRMWARE BOX

#<n>, BAY <n>

Error A SCSI drive has been

detected that has known,

bad firmware on it.

Continued usage of this

drive could result in drive

failure, decreased

performance or data loss.

Either the drive firmware

should be updated or the

drive should be replaced

as soon as possible

following the guidelines in

the “Recovering from Hard

Drive Failure” (Appendix E)

in this guide.

86 DRIVE

POSITION CHANGE

DETECTED

Informational The SCSI drives that make

up a configured volume

have been physically

moved within the

MSA1000 or an attached

storage enclosure. The

array controller has

updated its configuration

information accordingly.

87 DRIVE

POSITION CHANGE

INVALID

Informational The SCSI drives that make

up a configured volume

have been physically

moved in such a way that

the array controller can no

longer access the

configured volume.

The MSA1000 should be

powered off and the drives

restored to their original

positions.

Table 3: LCD Message Descriptions

Message Type Description Action

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 71 72

Commenti su questo manuale

Nessun commento