HP StorageWorks Enterprise File Services WAN Accelerator Manuale Utente Scaricare il pdf (Pagina 61)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 61

2 CONFIGURING THE HP EFS

WAN A

CCELERATOR

To set a static, in-path

route

1. Click the Setup tab to display the Setup menu.

2. Click Host Settings to expand the Host Settings menu.

3. Click Routing: In-Path to display the Host Settings - In-Path Routing page.

Figure 2-19. Host Settings - In-Path Routing Page

4. Use the controls to complete the configuration, as described in the following table.

5. Click Save to save your settings permanently or click Reset to return the settings

to their previous values.

Setting the DNS You set the primary Domain Name Service (DNS) server and domain for the HP EFS

WAN Accelerator in the Host Settings - DNS Settings page.

HP recommends you use DNS.

Control Description

Add New Route Destination. Specify the IP address.

Netmask. Specify the subnet mask.

Gateway. Specify the IP address for the gateway. The gateway must be in the same

network as the primary or auxiliary interface.

Add Route. Specify this option to add the entry to the list.

Remove Selected Routes. To remove an entry, click the check box next to the entry and

click Remove Selected Routes.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 231 232

Nessun commento

HP StorageWorks Enterprise File Services WAN Accelerator Manuale Utente Pagina 61