HP OfficeConnect Firewall Series Manuale Utente Scaricare il pdf (Pagina 61)

OfficeConnect VPN Firewall User’s Manual Chapter 9. Configuring Routes

Field

Description

Gateway IP

Address

Gateway IP address

9.3.2 Adding Static Routes

Follow these instructions to add a static route to the routing table.

1. Click Network  Routing submenu to enter the Static Routes

Configuration page.

2. Click button to enter Add Static Route page.

3. Enter a route name for this static route in the Route Name field.

4. If you want to advertise this static route in RIP, please do not check

―Private‖ button.

5. Enter the Destination Address, Subnet Mask and Gateway IP

Address to the specified field.

6. Select a interface from the Interface drop-down list.

7. Click to add a new route.

9.3.3 Deleting Static Routes

Follow these instructions to delete a static route from the routing table.

1. Click Network  Routing submenu to enter the Static Routes

Configuration page

2. Click on the check box in front of the rule to be selected.

3. Click to delete the selected route entries.

WARNING

Do not remove the route for default gateway unless you know

what you are doing. Removing the default route will render the

Internet unreachable.

9.3.4 Viewing the Static Routing Table

All IP-enabled computers and routers maintain a table of IP addresses that are

commonly accessed by their users. For each of these destination IP addresses,

the table lists the IP address of the first hop the data should take. This table is

known as the device’s routing table.

Figure 9.3 Viewing Routing Table

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 155 156

Nessun commento

HP OfficeConnect Firewall Series Manuale Utente Pagina 61