HP StorageWorks 20 - Modular Smart Array Specifiche Scaricare il pdf (Pagina 14)

Removal and Replacement Procedures

2-6 HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide

To remove the component:

1. Be sure that the online and activity LEDs on the failed drive are both off.

CAUTION: To prevent improper cooling and thermal damage, do not operate the system

unless all bays are populated with either a component or a blank.

2. Remove the failed drive.

To replace a hot-plug SCSI hard drive:

1. Slide the drive into the bay until it locks into place.

2. Close the lever.

CAUTION: Data loss can occur if the drive is not firmly seated.

3. Be sure that the drive LEDs illuminate one at a time and then turn off together to indicate

that the system has recognized the new drive.

In fault-tolerant configurations, allow the replacement drive to be reconstructed

automatically with data from the other drives. While reconstruction is in progress, the

online LED flashes.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 45 46

Nessun commento

HP StorageWorks 20 - Modular Smart Array Specifiche Pagina 14