HP PAVILION DV8 Informazioni Techniche Scaricare il pdf (Pagina 50)

4–16 Maintenance and Service Guide

Removal and replacement procedures

Memory module

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,

and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the mass storage device cover (see “Mass storage device” on page 4-10).

Remove the memory module:

✎

The top memory module slot contains the expansion memory module. The bottom slot contains the primary

memory module.

1. Spread the retaining tabs 1 on each side of the memory module slot to release the memory module.

(The memory module tilts up.)

2. Remove the memory module 2 by pulling it away from the slot at an angle.

✎

Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory

module slot.

Reverse this procedure to install a memory module.

Description Spare part number

4096-MB (1066-MHz, DDR3) 577606-001

2048-MB (1066-MHz, DDR3) 577605-001

1024-MB (1066-MHz, DDR3) 577604-001

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 147 148

Nessun commento

HP PAVILION DV8 Informazioni Techniche Pagina 50