HP -PB 10 Manuale Utente Scaricare il pdf (Pagina 55)

Chapter 4 55

Troubleshooting 10/100Base-TX/9000

Troubleshooting Overview

In the following HP-PB 10/100Base-TX LED Matrix:

X = LED ON, and

O = Flashing

HP-PB 10/100Base-TX LED Matrix

Power 10 100 Link Activity Test Description

X Improperly seated card or

defective card.

X X Driver has not initialized card.

Link cable is not connected to card or to

hub or switch.

X X Same as above but is for 100Base-TX.

X X X Driver couldn’t complete the

initialization of the card because an error

has been detected. Card may be

defective.

X X X Same as above but is for the 100Base-TX

mode.

X X X Normal quiescent state for 10Base-T.

X X X Normal quiescent state for 100Base-TX.

X X X O Normal state during transfer of 10Base-T

data. This state is also seen when the card

is connected to a switch and the card is

quiescent. Switch is sending link pulses.

X X X O Same as above but is for the 100Base-TX

mode.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 111 112

Nessun commento

HP -PB 10 Manuale Utente Pagina 55