HP E4402B Manuale Utente Pagina 79
- Pagina / 100
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Chapter 5 79
Options and Accessories
Options
High Stability
Frequency Reference
1D5 Option 1D5 improves the frequency reference accuracy.
The analyzer’s synthesizer is phase locked to an oven
controlled crystal oscillator (OCXO), instead of the
standard VCXO. When present with narrow resolution
bandwidth (Option 1DR) it provides 1 Hz and 10 Hz
resolution bandwidths.
IF, Sweep and Video
Ports
A4J Option A4J provides the analyzer with additional inputs
and outputs. They are as follows: SWP OUT, HI SWP
OUT (TTL), HI SWP IN (TTL), AUX VIDEO OUT, and
AUX IF OUT.
SWP OUT - sweep ramp output, provides a voltage ramp
proportional to the sweep of the analyzer (0 V to 10 V).
HI SWP OUT (TTL) - provides the HI SWP TTL signal
as an output (TTL high during a sweep, TTL low during
a retrace). It indicates when the analyzer is sweeping.
HI SWP IN (TTL) - allows external sweep control. It can
be grounded to stop sweeping.
AUX VIDEO OUT - provides detected video output
(before the analog-to-digital conversion) proportional to
vertical deflection of the trace.
AUX IF OUT - provides a 50
Ω, 21.4 MHz IF output that
is the down-converted signal of the RF input of the
analyzer.
Low Emission 060 Option 060 provides reduced radiated and conducted
emissions to comply with EN55011 Class B
requirements. This option applies during ac operation
only.
Option 060 is incompatible with TV Trigger (Option
B7B).
Low Frequency
Extension
UKB Option UKB extends the frequency range of the analyzer
on the low end to 100 Hz when DC coupling is selected.
This option requires installation of Option 1DR and is
only available on ESA models E4402B, E4404B, E4405B,
and E4407B.
Name
Option
Number
Description
- Getting Started Guide 1
- Additional Information 2
- Contents 3
- 1 Installation and Setup 5
- 6 Chapter 1 6
- Initial Inspection 7
- 8 Chapter 1 8
- Chapter 1 9 9
- Power Requirements 10
- Checking the Fuse 11
- AC Power Cord 11
- 12 Chapter 1 12
- Installation and Setup 12
- Table 1-3. AC Power Cords 13
- 14 Chapter 1 14
- Using an External Reference 16
- Firmware Revision 16
- Chapter 1 17 17
- Running Internal Alignments 18
- Printer Setup and Operation 19
- 22 Chapter 1 22
- Legal Information 23
- 24 Chapter 1 24
- Front and Rear Panel Features 25
- 2.1 Front Panel Overview 26
- −12.6 V, 150 mA maximum) 28
- Auto Align is on) every time 29
- 2.1.2 Display Annotations 30
- Freq Offset 31
- 2.2 Rear-Panel Features 33
- Chapter 2 37 37
- Rear-Panel Features 37
- 2.3 Key Overview 38
- Landscape 39
- Print Setup menu 39
- 3 Making a Basic Measurement 41
- 42 Chapter 3 42
- Making a Basic Measurement 42
- Using the Front Panel 43
- Creating a User Preset 44
- Viewing a Signal 45
- Setting Frequency Span 46
- , 5, 0, MHz 46
- , Mkr ➞ Ref Lvl 47
- 48 Chapter 3 48
- ≥26 dB above the noise 49
- 50 Chapter 3 50
- 52 Chapter 4 52
- File Menu Functions 53
- 54 Chapter 4 54
- Creating a directory 55
- Formatting a Floppy Disk 56
- Saving a File 57
- 58 Chapter 4 58
- Trace (2), Min Hold. Your 58
- Step 2. Save the file 59
- Loading a file 61
- Renaming a File 63
- Copying a File 64
- Deleting a File 65
- Using the Alpha Editor 66
- 5 Options and Accessories 67
- 68 Chapter 5 68
- Options and Accessories 68
- Option Descriptions 71
- Ω to 75 Ω Matching 72
- Additional Manual Set 0B1 73
- Premium 75
- FM demodulator (Option 106) 75
- Ω, 21.4 MHz IF output 77
- Ω, 21.4 MHz IF output that 79
- Limit lines 80
- Loss compensation 80
- Ω source impedance) 82
- Accessories 83
- External Keyboard 84
- GPIB Cable 84
- Agilent E1779A Battery Pack 85
- Parallel Interface Cable 85
- Printer 85
- RF and Transient Limiters 85
- RF Bridges 85
- RS-232 Cable 86
- Static Safe Accessories 86
- 6 In Case of Difficulty 87
- 88 Chapter 6 88
- In Case of Difficulty 88
- Table 6-1 Types of Messages 89
- Check the Basics 90
- Read the Warranty 92
- Service Options 92
- Calling Agilent Technologies 92
- Chapter 6 93 93
- 94 Chapter 6 94
- Chapter 6 95 95
- 96 Chapter 6 96
- Index-97 97
- Index-98 98
- Index-99 99
- Index-100 100
Prodotti e manuali riguardandi Misurazione, test & controllo HP E4402B
Misurazione, test & controllo HP 132A Manuale Utente
(330 pagine)
(330 pagine)
CDA CI330 manuali
Manuali dei proprietari e guide per l'utente per Lavatrici CDA CI330.
We fornisce 1 manuali pdf CDA CI330 per scaricare gratuitamente in base al tipo di documento: Specifiche
Commenti su questo manuale