Hp E 800 Manuale Utente Scaricare il pdf (Pagina 10)

Setting Up the HP NetServer E 800

Step 4: Installing Mass Storage Devices

• The NetServer is internally limited to 7 mass storage shelves.

The flexible disk drive and CD-ROM drive, which are standard on all

models of the HP NetServer E 800, occupy shelves 1 and 2 respectively.

• If a backup tape drive is used, it will occupy shelf 3.

• Shelves 4, 5, 6, and 7 are available for up to four SCSI hard drives and at

least one is required for the boot drive.

• IDE drives are not supported in this NetServer.

CAUTION Do not connect high voltage differential (HVD) SCSI devices

on the SCSI bus or you will damage the other devices.

1. Remove the Drive Cage by loosening the three captive screws.

Top of Chassis (Side view)

Captive Screws (3)

Front of

HP NetServer

Hard Disk

Drive Cage

(removable)

Shelf 1

Shelf 2

Shelf 3

Shelves 4-7 (4)

2. Install the SCSI hard disk drive.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Nessun commento

Hp E 800 Manuale Utente Pagina 10