Hp TC2120 Manuale Utente Pagina 38

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 37
32
Chapter 3 Installing and Configuring
3. Remove the left side cover.
4. Lay the server on its side (components showing).
5. Disconnect the heat sink cooling fan power cable from the connector on the system board.
6. Open the heat sink release latches by pressing down on the latches and unhooking them from the heat sink
bracket. Then, remove the heat sink by lifting it. See Figure 3-15.
Removing the Processor
1. If you have not removed the heat sink cooling fan assembly, do so now before continuing.
2. Open the ZIF (Zero Insertion Force) lever completely to allow removal of the processor.
Figure 3-15. Removing Heat Sink and Cooling Fan
CAUTION Wear a wrist-strap and use a static-dissipating work surface
connected to the chassis when handling components. Ensure
the metal of the wrist-strap contacts your skin.
Latch
LatchHook
Hook
Vedere la pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 124 125

Commenti su questo manuale

Nessun commento