
Chapter 1 Installation Overview
Lay the system board component-side up on a static-dissipating work surface with
the metal cross piece on the top rear corner of the system board extending off the
work surface, as shown in Figure 1-3.
Crosspiece must be OFF work surface.
System Board
Figure 1-3. Insert the DIMM
CAUTION Only install DIMMs on a system board lying ^at on a static-
dissipating work surface. The metal crosspiece indicated by
the arrow in Figure 1-3 must be OFF the work surface.
Otherwise, flexing can damage the system board.
Commenti su questo manuale