Hp Smart Array P600-Controller Manuale Utente Scaricare il pdf (Pagina 23)

Upgrading or replacing controller options

In this section

Replacing a battery .......................................................................................................................23

Replacing a battery

WARNING: There is a risk of explosion, fire, or personal injury

if the battery pack is not properly handled. Refer to "Battery

replacement notice (on page 52

)" before installing or removing any

item that contains a battery pack.

IMPORTANT: Whether you are replacing the main cache battery

or the secondary (lower) cache battery, remove both batteries so that

the board circuitry recognizes the new battery pack.

1. Close all applications, and then power down the server. This procedure

flushes all data from the cache.

2. Remove the cache module:

a. Open the ejector latches on each side of the DIMM connector (1).

b. Pull the cache module out of the DIMM slot (2).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Nessun commento

Hp Smart Array P600-Controller Manuale Utente Pagina 23